• page_banner

Wukong Explosion-proof light 50-400W

Wukong Explosion-proof light 50-400W

Short Description:

1. Imported chips are preferred, with excellent luminous flux maintenance rate and high luminous efficiency.
2. Adopt surface mount technology (SMT) to greatly improve thermal conductivity.
3. Using the latest nanotechnology, it can increase the illuminance by 16.67% compared to the coated Engineering plastics.


Product Detail

download pdf

Product Tags

Features

Optical system features
1. Imported chips are preferred, with excellent luminous flux maintenance rate and high luminous efficiency.
2. Adopt surface mount technology (SMT) to greatly improve thermal conductivity.
3. Using the latest nanotechnology, it can increase the illuminance by 16.67% compared to the coated Engineering plastics.

Drive system characteristics
1. It adopts constant current drive and has short circuit and overvoltage protection functions.
2. It can be an integrated emergency function, which is convenient and simple to install. The emergency power reduction function can be activated, which makes emergency response more energy -saving in an unmanned environment and improves the fire safety function.
3. Excellent compatibility, will not cause interference to other electrical appliances, can make the voltage tolerance 25% fluctuate.
4. The drive adopts the glue sealing process to ensure that the components are dissipated and protected from corrosion.

Structure characteristics of the whole lamp
1. Standard heat dissipation structure, the wiring cavity, power supply cavity, and light source cavity all independently dissipate heat without affecting each other.
2. The exposed fasteners and accessories are made of 304 stainless steel, which has stronger anti -corrosion performance.
3. It adopts one - piece emergency, no additional distributor box is needed, which is convenient for installation and maintenance.
4. The installation method can choose ceiling type, boom type, bracket type.

Specification

Scope of application
◆Applicable to explosive gas environment Zone 1 and Zone 2;
◆Applicable to IIA, IIB, IIC level explosive gas environment;
◆Suitable for environments where the temperature group is T1~T6;
◆Suitable for energy-saving renovation projects and places where maintenance and replacement are difficult;
◆Widely suitable for large-area flood/projection lighting places in the field of petroleum, petrochemical and chemical enterprises, and various drilling operation sites and field lighting as large-area flood/projection lighting;
◆Used as gas station canopy, flood lighting in various factories, and road lighting in factories.

Normal working conditions
◆The altitude of the installation site does not exceed 2000m;
◆The ambient temperature is -40℃~+40℃, and the average temperature within 24h does not exceed +35℃;
◆The relative humidity of the surrounding air does not exceed 95% (+25 ℃) ;
◆Where there is no severe vibration, impact or shaking;
◆Applicable to Zone 1, Zone 2, llA, ll B, IIC category and T1~T6 group explosive gas environment or combustible dust place.

The main technical parameters

Model (Ⅰ) Type (Ⅱ) Type (Ⅲ) Type (Ⅲ) Type
Executive standard Gb3836 (equivalent to IEC60079, EN series standards)     /GB12476 (equivalent to IEC61241, EN series standards)
Explosion - proof mark

Exd emb llCT4/6 Gb/Ex tDA21 IP66 T135℃

Rated voltage 85 -265VAC
Frequency Range 50Hz
Rated power 50W - 100W 120W -200W 240W - 300W 350W -400W
LED luminous flux 6500 - 13000lm 15600 -26000lm 31000 - 37000lm 42000 - 52000lm
Power factor ≥0.95
Power Efficiency ≥0.88
Color rendering index ≥80
Inrush current Cold start/Cold; 30A(max) 230VAC
Safety UL8750,TUV EN61347 - 1, EN61347 -2 - 13
Battery compatibility standard EN61000 - 3 -2,TUV EN61347 - 1, EN61347  2 - 13
Protection level IP 66
Anti -corrosion grade Wf2
Inlet thread G3/4"
Cable specifications Φ7-Φ12mm
Installation method x: ceiling type/ b: wall suction/ q: embedded

z: bracket type/ m: street lamp type

working environment Temperature; -40 -45℃ Humidity: 10% -90%
Work life ≥50000H
product weight 9. 5kg 14. 5kg 18kg 29kg

Light distribution curve and size chart

deta (1)
deta (2)

    (Ⅰ) Type                                            (Ⅱ) Type                                                (Ⅲ) Type

Installation&Application

abc

1.Must have earth line in the right application!
2.After Earthing, must use insulation tape, insure the separating and water-proof.
3.Fastening the screw, take care any loose condition!
4.Input vltage not exceeding AC100-277V 1 DC24V!

After sale service

Response in 2 hours if you have any problem when you receive the goods.
Below condition is free of repairing.
Damage due to faulty application and operation
Damage due to transportation
Damage due to self repairing.
Damage due to natural disaster


  • Previous:
  • Next:

  • Write your message here and send it to us